Puch Maxi S / N E50 Kickstart Clutch CLAW V4 Race (with yellow springs)

The ultimate powerhouse: CLAW V4 Racing Clutch

Put maximum power on the road with CLAW's completely redesigned V4 clutch. This is the very first 4-claw clutch developed specifically for the E50 engine! Whether you're going for victory on the track, brute force in motocross, or a lightning-fast street setup: this clutch has been fully tested and is ready for heavy-duty work.

Innovation with maximum grip The V4 uses 5mm Aramid lining on highly accurate CNC-milled aluminum segments. Thanks to their clever positioning, the segments are offset from each other, utilizing the full width of your clutch housing. In combination with the supplied yellow springs, the clutch only engages around 8000 RPM, ensuring an explosive start.

Specifications & Features:

• Brand: CLAW (V4 Design)

• Type: 4-segment clutch (Kickstart & Pull-start compatible)

• Material: CNC-milled aluminum with 5mm Aramid lining

• Engagement Point: Approx. 8000 RPM (Yellow springs)

• Application: Fits in the standard E50 clutch housing, NO SMALLER DIAMETER HOUSING NEEDED.

• Setup: Ideal for tuned 70cc / 74cc or very fast 50cc engines

• Extra: Equipped with a keyway and can be used with the original kickstart sprocket

• Includes: Shim rings for additional spring preload, allowing engagement speed up to 10500RPM

⚠️ Installation tips:

• Preparation: Important: always soak the clutch in ATF oil for 24 hours before installation. This prevents premature wear and ensures optimal operation.

• Securing & Torque: Always use a clutch key. Tighten the bolts to a maximum of 10 NM and secure them with blue Loctite.

• Additional Reinforcement: Due to the high forces, it is advised to additionally secure the clutch housing's gear to the housing with a few spot welds. This prevents the clutch housing from rotating over the gear.